USB/Battery Black Round Base
Directions for Black Round USB/Battery Base
Choose one:
USB power: plug the included cable into a USB charger or power source.
Can use a USB Power adapter to plug into 110V
Battery power: insert 3 × AA batteries into the battery compartment.
Insert Acrylic Plate
Slide your acrylic plate (usually ≈4 mm thick) into the slot on the LED base.
Turn On / Off
With remote:
Remove the plastic tab from the remote battery if present so the battery can make contact.
Press the power button on the remote to turn the lamp on or off.
Without remote:
Press the touch button on the base itself to turn on/off.
Control Light Colors & Modes
Use the IR remote to:
Change colors (16 RGB options on TDL-S2).
Adjust brightness.
Select modes such as steady colors, fade, flash, or color cycle.
Tip: The base usually also responds to button presses on the base if you don’t use the remote.
Choose one:
USB power: plug the included cable into a USB charger or power source.
Can use a USB Power adapter to plug into 110V
Battery power: insert 3 × AA batteries into the battery compartment.
Insert Acrylic Plate
Slide your acrylic plate (usually ≈4 mm thick) into the slot on the LED base.
Turn On / Off
With remote:
Remove the plastic tab from the remote battery if present so the battery can make contact.
Press the power button on the remote to turn the lamp on or off.
Without remote:
Press the touch button on the base itself to turn on/off.
Control Light Colors & Modes
Use the IR remote to:
Change colors (16 RGB options on TDL-S2).
Adjust brightness.
Select modes such as steady colors, fade, flash, or color cycle.
Tip: The base usually also responds to button presses on the base if you don’t use the remote.