USB Wood Oval
1. Power It
USB power only — plug the included USB cable into a USB power adapter or computer.
(There’s no built-in battery inside.)
2. Insert the Acrylic Plate
Slide the acrylic plate into the slot on the wood base.
3. Turn On / Change Modes
Mode Button on cord
Press Mode to turn on the LEDs.
Each press cycles through light colors and light effects in this order:
4. Adjust Brightness
🧼 5. Cleaning & Care
⚠️ Tips & Safety
USB power only — plug the included USB cable into a USB power adapter or computer.
(There’s no built-in battery inside.)
2. Insert the Acrylic Plate
Slide the acrylic plate into the slot on the wood base.
3. Turn On / Change Modes
Mode Button on cord
Press Mode to turn on the LEDs.
Each press cycles through light colors and light effects in this order:
- Red
- Green
- Blue
- Orange
- Cyan
- Purple
- White
- Slow flashing mode
- Fading RGB mode
- After the final color (red again), pressing Mode turns the lights off.
4. Adjust Brightness
- Press “+” to increase brightness.
- Press “–” to decrease brightness.
🧼 5. Cleaning & Care
- Wipe the acrylic plate with a soft, clean cloth.
- Avoid abrasive cleaners — they scratch the acrylic.
⚠️ Tips & Safety
- This product is for indoor use only; not waterproof.
- Avoid touching the acrylic surface directly with fingers (fingerprints reduce illumination quality)